F-635 Autoclavable pH Electrode

This is the standard Broadley-James metric FermProbe connector. This FermProbe style has been used as a standard for years. It is designed to be used in bioprocess applications where CIP/SIP procedures are used. The F-635 Autoclavable pH Electrode will withstand multiple autoclaving or sterilisation cycles, however, an autoclave cap should be used when autoclaving the electrode.

Metric FermProbe F-635 autoclavable pH Electrode

This FermProbe autoclavable pH electrode style features a metric Pg13.5 threaded polymer cap that allows it to be used with European style electrode housings. Autoclavable as well as steam sterilisable, this style of pH FermProbe is the first choice for use with small autoclavable benchtop vessels. Available only in the disconnect cap style. Cables must be ordered separately (see the Accessories tab for compatible cables).

Features

• Metric threaded cap is compatible with nearly all European designed bioprocess electrode housings.
• Steam sterilisable and autoclavable.
• First choice for use with small autoclavable vessels.
• Available in variety of lengths for different insertion length requirements and applications.

Specifications

• 0 - 13 pH range
• Steam sterilisable to 135° C
• 150 psig max. pressure
• Double junction, Ag-AgCl reference system
• Metric Pg13.5 threaded disconnect cap

Choose Electrode Model

If the electrode needs to fit an existing cable, check cable connector. If it has a male connector, an F-635 or F-835 FermProbe is required. Another guideline is to note the connector’s colour. If the cable connector is black, use the F-635 or F-835 Fermprobe.

Choose Electrode Length

Benchtop Applications

The electrode length is from the base of the cap to the tip of the electrode (the glass part of the electrode).

SIP Tank Applications

If you have already chosen an electrode housing, select an electrode length with the same Class designation as the housing. The housing ordering information box also lists the correct electrode length to order. If you have not already chosen the housing, please review the recommendations next to each electrode model below.

Confirm Cable Length and Connector

Model F-635 pH electrodes require disconnect cable and connector assemblies (see Accessories tab for compatible cable information).

Ordering Information

Model F-635 pH FermProbe with Standard Metric Cap

Note: the vessel sizes are for guidance only – check your own vessel dimensions or the length of the electrode you are replacing.

Recommended Housings

The F-635 pH Electrode has a metric Pg13.5 threaded polymer cap allowing it to be used with European style housings. We would recommend the following Broadley-James sensor housings for use with the  Model F-635 FermProbe^® steam sterilisable and autoclavable pH electrode:

• Model 335 Unguarded Sensor Housing – Standard 25mm (Pg 13.5), typical vessel insertion lengths 52mm & 128mm
• Model 325 Guarded Sensor Housing – Standard 25mm (Pg 13.5), typical vessel insertion lengths 37mm & 113mm
• Model 346 Sensor Unguarded Housing – Braun Safety Port 25 mm (Pg13.5), typical vessel insertion length 25mm
• Model 356 Sensor Guarded Housing – Braun Safety Port 25 mm (Pg13.5), typical vessel insertion length 40mm

Compatible Cables

The F-635 Autoclavable pH Electrode uses a standard S8 detachable cable connection. We recommend the following cables for use with it:

​

Cable Type	Sensor Connector & Device Connector	Device Terminal
HP Plug to BNC Plug, Type A
HP Plug to BNC Plug, Type M
HP Plug to DIN Plug, Type M
HP Plug to Crimped Ferrules, Type M
HP Plug to Ferrules, Solution Ground, Type N