-
DO Accessories (20)
-
pH Accessories (8)
-
Dissolved Oxygen Membrane Kits (10)
-
Housings (12)
-
Vessel Ports, Plugs & Retainer Rings (10)
-
Model 335 Guarded Housing (Standard 25 mm – Pg13.5)
-
Model 325 Housing (Standard 25 mm port – Pg13.5)
-
Model 330 Guarded Housing (Standard 25 mm)
-
Model 320 Housing (Standard 25 mm)
-
Model 356 Guarded Housing (Braun Safety Port 25 mm – Pg13.5)
-
Model 346 Housing (Braun Safety Port 25 mm – Pg13.5)
-
Model 336 Housing (Braun Safety Port 25 mm)
-
Model 326 Housing (Braun Safety Port 25 mm)
-
Model 367 (1.5″ Sanitary Tee)
-
Model 357 Housing (1.5″ Sanitary Tee)
-
Model 350 Housing (2″ Sanitary Tee)
-
O-Rings
-
Single Cartridge Kit for 12mm DO Sensors
-
Retainer Ring for 25mm Port
-
Chamfered 25 mm Plug for Chamfered 25 mm Port with Sanitary Flange
-
Straight Plug for B. Braun Biotech 25mm Port
-
Straight Plug for Standard 25mm Port (Forward O-ring)
-
Straight Plug for Standard 25 mm Port
-
Chamfered Plug for Chamfered 25 mm Port
-
NovAseptic Sanitary Side Port
-
B. Braun Biotech 25mm Safety Side Port
-
Straight 25 mm Threaded Ports
-
Chamfered 25mm Threaded Port
-
Smart Polarizer
-
Dissolved Oxygen Sensor Signal Simulator
-
Mains Powered Four-Station Polarizer
-
Battery Powered Single-Station Polarizer
-
Connector Splash Guard
-
Straight Connectors
-
Right Angle 4-Pin Connector Assembly
-
DO Sensor Rebuild
-
Cathode Assembly
-
Cathode Retainer Nut
-
Cathode Removal Tool
-
Four Cartridge Kit for 12mm DO Sensors
-
25 Piece Cartridge Kit for 12mm DO Sensors
-
Single Cartridge Kit for 19 & 25mm DO Sensors
-
Four Cartridge Kit for 19 & 25mm DO Sensors
-
25 Piece Cartridge Kit for 19 & 25mm DO Sensors
-
Single Cartridge Kit for OxyProbe II
-
Four Cartridge Kit for OxyProbe II
-
16 Piece Cartridge Kit for OxyProbe II
-
OxyProbe II Replacement Cap Sleeve
-
Membrane Cartridge Tester
-
Cable Dust Cap
-
Connector Dust Cap
-
Calibration Caps
-
DO Electrolyte Solution
-
Threaded Retainer Nut
-
Autoclave Cap (Pack of 5)
-
Soaker Bottles (4 Pack)
-
Mounting Hardware Kit for Stanchion Mount
-
Stanchion Mount Storage Container for Pipe or Vessel Mounting
-
Benchtop Free Standing Storage Container
-
pH Electrode Storage Solution
Accessories
The primary components of a measurement loop are the sensors and transmitters. However, when readings are suspect or if noise and interference are a problem, it can be hard to find the source of the problem without having the proper equipment. Many of the BioProcess accessories are designed with troubleshooting in mind, allowing the metrology department or even the operator to diagnose equipment quickly and efficiently.
