Europe
Insertion Housing for 1¼” plain tank or tank wall installation for use with Broadley-James Ltd 12mm ProcessProbes the SP100 and SP200 Probes.
The sensor holder features a push-on o-ring sealed cap. This allows the connection cable and the sensor to be easily replaced, whilst protecting them from the environment. Only a 3mm Broadley-James “Type A” connection cable should be used with the sensor holders.
1¼" plain tank or tank wall installation, suitable for use with Broadley-James Ltd 12mm ProcessProbes the SP100 and SP200 Probes.
| Operating Temperature | Operating Pressure | Wetted Materials | Sensor |
| -5 to 60°C (not freezing) | Vacuum to 6.5 bar (except PME22) | PVC-U, EPDM washer, silicon o-ring and sensor | 12 x 120 mm PG13.5 ProcessProbe |
| Model | Part No. | Description |
| PME27 | 2132 | 1.25″ BSP PVC insertion holder only |
The PME27 Insertion Housing is compatible with the Broadley-James Ltd range of 12mm ProcessProbes as detailed below.
| Probe | Part Number | Length | Type |
| SP100 pH Polymer Body 12 mm ProcessProbe® | SP100-4330-DH | 120 mm | pH |
| SP100 Redox Polymer Body 12 mm ProcessProbe® | SP100-4PB0-DH | 120 mm | ORP |
| Probe | Part Number | Length | Type |
| SP200 pH Glass 12 mm ProcessProbe® | SP200-2330-DH | 120 mm | pH |
| SP200 Redox Glass 12 mm ProcessProbe® | SP200-2PB0-DH | 120 mm | ORP |
Sensors, cables, accessories, and instruments are also available. Please contact us for additional information at the address and phone numbers below.
USA