PME22 Dip Housing

B2–LS104–020–M30

B5-13202-5T7

B5-11005-07-J

B2-LS103-015-M30

B4-21006-020-M10

B4-35005-020-M10

B4-41001-2T9-M10

B4-21005-015-M10

B4-35004-015-M10

B4-31024-8T9-B06

B4-31004-8T9-B06

B4-32023-5T7-B03

B4-21004-007-M10

B4-35002-005-M10

B4-31003-5T7-B06

B4-53004-020-M10

B4-22005-020-M10

B4-12004-020-M10

B2-LS202-020-M69

B5-11315-020

B5-11007-20-R

B4-82004-8T9-M27

B4-53003-015-M10

B4-22004-015-M10

B4-12003-015-M10

B4-44002-8T9-M27

B4-42002-8T9-M27

B4-72003-8T9-M27

B4-32005-8T9-B03

B4-32004-8T9-B03

B2-LS201-015-M69

B5-11314-015

B5-11006-15-R

B5-13103-8T9

B5-12103-8T9

B5-11355-07J

B4-21002-003-M10

B4-31002-2T3-B06

B4-35001-2T3-M06

B4-53002-007-M10

B4-22003-007-M10

B4-12002-007-M10

B4-32003-5T7-B03

B2-LS102-007-M30

B5-11313-007

B5-11004-07-R

B4-22002-005-M10

B5-11312-005

B5-11003-05-R

B5-13102-5T7

B5-12102-5T7

B5-11321-03J

B5-11002-03-J

B5-13201-003

B4-82002-2T7-G34

B4-82001-2T7-M18

B4-81003-2T9-M12

B4-81002-2T9-M10

B4-81001-2T3-M06

B5-51001-2T9-006

B4-53001-2T5-M10

B4-23001-2T9-M10

B4-22202-015

B4-22001-003-M10

B4-12001-2T5-M10

B4-44001-2T7-M18

B4-42001-2T7-M18

B4-72002-2T7-G34

B4-72001-2T7-M18

B4-32002-2T3-B03

B2-LS101-2T5-M30

B5-11311-2T3

B5-11001-03-R

B5-13101-003

B5-12101-003

Open channel, top or side tank mounting

The sensor holder features a push-on o-ring sealed cap.  This allows the connection cable and the sensor to be easily replaced, whilst protecting them from the environment.  Only a 3mm Broadley-James “Type A” connection cable should be used with the sensor holders.

Open channel, top or side tank mounting. The PME22, 600mm or 1200 mm dip housing is suitable for use with Broadley-James Ltd 12mm ProcessProbes the SP100 and SP200 Probes.

General Specification

 Operating Temperature Operating Pressure Wetted Materials Sensor
-5 to 60°C (not freezing) Vacuum to 6.5 bar (except PME22) PVC-U, EPDM washer, silicon o-ring and sensor  12 x 120 mm PG13.5 ProcessProbe

 

PME22 Dip Housing

Model Part No. Description
PME22 2128 600mm dip PVC holder only
PME22 2129 1200mm dip PVC holder only

Compatible Sensors

The PME22 Dip Housing is compatible with the Broadley-James Ltd range of 12mm ProcessProbes as detailed below.

SP100 Series ProcessProbe® Sensors Polymer Body

Probe Part Number Length Type
SP100 pH Polymer Body 12 mm ProcessProbe® SP100-4330-DH 120 mm pH
SP100 Redox Polymer Body 12 mm ProcessProbe® SP100-4PB0-DH 120 mm ORP

SP200 Series ProcessProbe® Sensors Glass Body

Probe Part Number Length Type
SP200 pH Glass 12 mm ProcessProbe® SP200-2330-DH 120 mm pH
SP200 Redox Glass 12 mm ProcessProbe® SP200-2PB0-DH 120 mm ORP

Sensors, cables, accessories, and instruments are also available. Please contact us for additional information at the address and phone numbers below.

PME22 Dip Housing Dimension Drawing

The dip housing an be supplied with a choice of mounting accessories:

Part No. Description
6082 Adjustable 1” PVC-U BS10 Table D full face flange, 4 x 14mm holes on 83 mm PCD. Note the flange is not sealed to the PME22 housing.
6081 PVC-U Angled bracket assembly for mounting on a tank or sump side wall. Note the flange is not sealed to the PME22 housing.
1624  Stainless steel mounting bracket.