Model 320 Housing (Standard 25 mm)

B2–LS104–020–M30

B5-13202-5T7

B5-11005-07-J

B2-LS103-015-M30

B4-21006-020-M10

B4-35005-020-M10

B4-41001-2T9-M10

B4-21005-015-M10

B4-35004-015-M10

B4-31024-8T9-B06

B4-31004-8T9-B06

B4-32023-5T7-B03

B4-21004-007-M10

B4-35002-005-M10

B4-31003-5T7-B06

B4-53004-020-M10

B4-22005-020-M10

B4-12004-020-M10

B2-LS202-020-M69

B5-11315-020

B5-11007-20-R

B4-82004-8T9-M27

B4-53003-015-M10

B4-22004-015-M10

B4-12003-015-M10

B4-44002-8T9-M27

B4-42002-8T9-M27

B4-72003-8T9-M27

B4-32005-8T9-B03

B4-32004-8T9-B03

B2-LS201-015-M69

B5-11314-015

B5-11006-15-R

B5-13103-8T9

B5-12103-8T9

B5-11355-07J

B4-21002-003-M10

B4-31002-2T3-B06

B4-35001-2T3-M06

B4-53002-007-M10

B4-22003-007-M10

B4-12002-007-M10

B4-32003-5T7-B03

B2-LS102-007-M30

B5-11313-007

B5-11004-07-R

B4-22002-005-M10

B5-11312-005

B5-11003-05-R

B5-13102-5T7

B5-12102-5T7

B5-11321-03J

B5-11002-03-J

B5-13201-003

B4-82002-2T7-G34

B4-82001-2T7-M18

B4-81003-2T9-M12

B4-81002-2T9-M10

B4-81001-2T3-M06

B5-51001-2T9-006

B4-53001-2T5-M10

B4-23001-2T9-M10

B4-22202-015

B4-22001-003-M10

B4-12001-2T5-M10

B4-44001-2T7-M18

B4-42001-2T7-M18

B4-72002-2T7-G34

B4-72001-2T7-M18

B4-32002-2T3-B03

B2-LS101-2T5-M30

B5-11311-2T3

B5-11001-03-R

B5-13101-003

B5-12101-003

FermProbe® electrode housings are designed to be used with model F-615 and F-815 style FermProbe pH electrodes. These housings fit nearly all standard 25 mm side ports found in production and pilot plant vessels and are available in a variety of different lengths to suit your application.

Category:

BJC Model 320 Housing 25mmThe FermProbe design requires that the pH electrode be secured to the housing by a free-spinning threaded retainer nut. This allows the electrode to be installed into or removed from the housing without twisting or disconnecting the electrode cable. This feature is very helpful when calibrating the pH electrode tank side in a production environment.

Specification

  • 316L stainless steel construction.
  • Serialized for traceability to mill steel specifications.
  • RA32 finish with electropolish on all wetted parts.
  • Permanently secured port retainer ring for additional operator safety.

Additional Features

  • Guarded versions for rugged handling while protecting the pH glass bulb in a production environment.
  • Unguarded versions for viscous media.
  • Available in a variety of lengths for different insertion length requirements.
  • Custom designs and modifications promptly quoted.
Housing Model Class Typical Vessel Insertion Length Used With pH Electrode Models Used With Electrode Length Housing Part Number
Model 320 A 37 mm ( 1.5″) F-615, F-815 and F-600 130 mm 320-61-H070
Model 320 B 66 mm ( 2.6″) F-615, F-815 and F-600 160 mm 320-61-H100
Model 320 C 113 mm ( 4.5″) F-615, F-815 and F-600 210 mm 320-61-H150

 

  1. Confirm the vessel has a standard 25 mm side port.
  2. Determine whether the application will permit the use of a bulb guard on the housing. The bulb guard design is highly recommended for all types of applications except where media is highly viscous. Highly viscous media is prone to clog the guard area of the housing which can cause erroneous measurements.
  3. Determine how far the housing and electrode should extend for best performance. For most process media the minimum length is optimum. However, if the media is viscous and tends to thickly coat the inner vessel wall, then a longer length that protrudes farther into the vessel may provide better pH electrode performance.
  4. Choose a pH electrode from among the FermProbe models F-615 and F-815. Each of these rugged process pH electrodes secure to the housing with a free-spinning threaded retainer nut. The pH electrodes must be ordered separately.