Europe
USA
The B2030 is an optical dissolved oxygen (DO) sensor with a domed measuring surface designed and optimised for use with SU100 series BPC gas wells. The sensor performs continuous measurement behind the rugged, sterile, steel-mesh reinforced membrane barrier of the gas well, eliminating the need to heat sterilise the sensor. The sensor has no wetted materials as the gas well prevents the sensor from direct contact with the BPC media.
The B2030 digital output is compatible with SensorTalk™ input DO transmitters and similar instrumentation. The sensor output can be converted to Modbus RTU with a SmartSync™ signal conditioner. Additionally, the digital output can be converted to nanoamp output with the OptaSync™ signal conditioner.
The B2030 threads directly into any SU100 series BPC gas well using the sensor’s Pg13.5 threaded fitting. Hand tightened. No tools needed.
Sensor Specifications
| Measurement Range | 0–300% SAT |
| Operational Temp. Range | 5°–50° C [41°–122° F] |
| Pressure Range | 0–3750 mmHg [0–72 psig] |
| Response Time: | T98 < 15 seconds at 37° C; N2 to AIR T98 < 15 seconds at 37° C; AIR to N2 |
| Accuracy | Within 1% full scale (% SAT) |
| Sterilization Temperature | Not heat sterilizable. For use only with SU100 series single-use BPC gas wells. |
| Insertion Length | 120 mm |
| Sensor/BPC Gas Well Interface | Pg13.5 Threads |
| Sensor Connector | 8-pin Variopin |
| Sensor Output |
|
| Power Supply | 5 VDC supplied by SmartSync™ or transmitter |
| Storage Temperature | 5°–35° C [41°–95° F] |
| Shelf Life | 48 months (optical membrane) |
